Nederman Filtac oil mist solutions are the most efficient mist collection solutions for all kinds of airborne particles and droplets produced during metalworking processes. Able to handle everything from dry particulates and emissions from MQL applications (a mixture of Dry and Wet) to the smallest oil and coolant aerosol droplets, they are the most flexible and smart choice for all modern machining workshops.
Nederman Filtac oil mist collectors feature a unique, specially treated fibre surface that allows the collected droplets to coalesce, grow at fibre intersections and finally drain by gravity out of the filter medium. This technology, called FibreDrain™ ensures superior collection efficiency even under the most extreme conditions in continuous 24/7 operations.
The filters don’t absorb or get clogged by the oil and coolant. Instead, due to the FibreDrain™ technology, the air is thoroughly cleaned and a maximum of oil or coolant can be retrieved and reused.
Our Nederman Filtac oil mist collectors can be used for emulsion (coolant mists), neat oil (oil aerosol and smoke) and MQL applications.
Nederman Filtac oil and coolant mist solutions collect mist, aerosols and smoke at the source, i.e. directly at the metalworking machine, either enclosed or open. The mist-laden air is passed through the layers of compressed filter media at low velocity.
The airstream enters at the bottom of the filter unit and passes upward through the filter cartridges. The filter stack is multi stage and progressive in filtration properties, which means that the smaller the droplet or particle, the further it will penetrate the filters in the air flow direction. The captured mist drains from the filter surfaces by gravity down in the sump of the collector.